Overland Adventure Truck

Instagram

overlandadventuretruck

Production and design of expedition and adventure vehicles.
Contact us with any inquiries!

Night ops to beat the rain!

Night ops to beat the rain!

The first bay is insulated and sheeted. This insul

The first bay is insulated and sheeted. This insulation system is quite the process. We should have an easier time with the rest after getting g a decent idea of how this all goes together. now we must wait for next weekend's dry weather window. Until then, we can complete the walls!

We made some good progress the past couple of days

We made some good progress the past couple of days.

Excellent progress again today despite the 30 degr

Excellent progress again today despite the 30 degree temps. And now, tacos.

Not too bad for half a day of progress!

Not too bad for half a day of progress!

The gantry is in the shop! Well, kinda... tomorrow

The gantry is in the shop! Well, kinda... tomorrow morning we start building!

Slab is curing and we cut 520 ft of expansion join

Slab is curing and we cut 520 ft of expansion joints. Hopefully this will help avoid unwanted cracks!

And just like that, 11 hours later we have a shop

And just like that, 11 hours later we have a shop finish floor. After a few days of curing and a few hours of relief cuts, this slab will be ready to erect our building!

Today is is the day that our new shop gets a floor

Today is is the day that our new shop gets a floor! So stoked!!!

Fresh rubber and powder coated wheels, this truck

Fresh rubber and powder coated wheels, this truck is about to undergo a drastic transformation! We just received a 19'9" @totalcomposites camper body kit for this truck and are currently working on it's subframe mounting system.

100 psi and holding! Pressure test successful.

100 psi and holding! Pressure test successful.

Here's a little UP action from the manlift!

Here's a little UP action from the manlift!

95 tons of crushed rock, 4000 ft of vapor barrier,

95 tons of crushed rock, 4000 ft of vapor barrier, 2" ridged foam insulation/thermal break installed, 2980 ft of pex installed for hydronic heating, 1100 ft of 3/4" conduit layed, and 6500lbs of rebar tied. We used approximately 3700 rebar ties over the past two days. Definitely tired and sore. Only thing left before Monday's inspection is to install the hydronic heating manifold and my pressure testing setup for the inspector.

My first real boss when I built log houses lent me his telescoping boom man lift for the assembly process. So grateful! #notadrone

This tool is fantastic!! This is my first time usi

This tool is fantastic!! This is my first time using one of these for a hydronic install. So quick!

Hydronic heat tubing is in! Next up, electrical co

Hydronic heat tubing is in! Next up, electrical conduit.

Busy busy day!! 4 sets of @totalcomposites panels

Busy busy day!! 4 sets of @totalcomposites panels arrived today.

Things are really starting to take shape! Tomorrow

Things are really starting to take shape! Tomorrow is vapor barrier, foam and tubing.

Gravel base is level and compacted. Today we buil

Gravel base is level and compacted. Today we build forms, lay vapor barrier and maybe start laying foam and hydronic heat tubing.

Another step complete! Time to prepare for the sla

Another step complete! Time to prepare for the slab!

Ready for inspection 🤞 concrete monday for the

Ready for inspection 🤞 concrete monday for the footings!

More Images... Follow on Instagram